Digital display blast drying oven, laboratory constant temperature drying oven supplier
The heating and constant temperature system in the box is composed of digital temperature controller, electric heater and low-noise motor; the temperature control is accurate, intuitive and easy to read; the temperature of the studio is between room temperature and 300 ℃; Windows for easy viewing of heated items in the box.
Scope of application:
Suitable for determination of moisture in coal, drying items, and other heat treatments that require drying. The heating constant temperature system in the box is composed of digital temperature controller, electric heater and low-noise motor, etc .; the temperature control is accurate, intuitive and easy to read; the temperature of the studio is between room temperature and 300 ℃; the double-layer tempered glass observation on the door Windows for easy observation of heated objects in the box.
The heating constant temperature system in the box is composed of a digital temperature controller, an electric heater and a low-noise motor;
Temperature control is accurate, intuitive and easy to read; studio temperature is at any constant temperature between room temperature and 300 ℃;
The double-layer tempered glass observation window on the box door is convenient to observe the heated items in the box.
1. The shell of the drying box must be well and effectively grounded to ensure safety.
2. Do not put perishable, flammable and explosive items in the drying box to dry.
3. When the newly set temperature is lower than 100 ¡ã C, the secondary heating method can be used to eliminate the temperature "overshoot" phenomenon. Assuming 50 ¡ã C and 40 ¡ã C for the second time, set the temperature to 50 ¡ã C when the temperature overshoot starts to fall back. .
4. When the drying box is in operation, the fan switch must be turned on to make it run, otherwise the temperature in the box and the measured temperature have a large error, and the motor or sensor will be burned due to this operation.
5. The inside of the box should be kept clean, and the plastic dust cover should not be put in place for a long time, and placed in a dry environment room.
6. When the temperature of the working chamber of the drying box is close to the set temperature, the heating indicator light will turn on and off, which is normal. Generally, the temperature in the working room enters a constant temperature state about 30 minutes after the measurement temperature reaches the control temperature.
Points for safe use
1) Please read the entire contents of the "Instruction Manual" carefully before using the instrument.
2) To prevent electric shock, the instrument must be reliably grounded.
3) The instrument should be used in a ventilated, dry, non-corrosive gas environment.
4) Only use the high-frequency porcelain drying dishes provided with this machine. Do not use other utensils.
5) When the test is finished, pay attention to the high temperature of the drying dish. Wear heat-resistant gloves and take the drying dish to avoid burns.
6) If there is no sample in the furnace and it is accidentally started, please immediately interrupt the heating program or open the furnace door to stop its work.
7) It must be repaired by professionals. If you need to replace the heating tube, power cord, fuse, etc. in the furnace, use our company's special accessories
1. Installation and commissioning and on-site training:
Install and debug the instrument for the user free of charge according to the time and place required by the user. The company and the company's authorized technicians provide users with free on-site training services when installing and commissioning instruments and routine maintenance for users, so that users can be proficient in instrument performance, operation and use, and general maintenance.
The whole machine warranty period is one year. The expenses incurred for repairs during the warranty period, except for those that are not explicitly covered by the warranty, include all costs including component costs, working hours costs, travel expenses, and transportation costs, which are borne by our company.
3. Maintenance regulations:
Under normal use, if the instrument fails, the maintenance station guarantees a response within 24 hours after receiving the notification. If on-site maintenance is required, we promise to send someone to the site as soon as possible and eliminate the fault within a short period of time. Fees for replacement parts and maintenance hours are charged at a uniform price set by the company.
4. Other commitments:
We are committed to ensuring adequate supply of accessories for each model of instrument and to provide the best price.
Specialized in the development, development, production and sales of laboratory, laboratory crushing, sample preparation, sampling equipment, laboratory analysis equipment. Among the laboratory analysis instruments, coal quality analysis instruments and petroleum analysis instruments are advanced product manufacturing service providers with advanced technology, complete product varieties, and comprehensive services.
Hebi Keda Instrumentation Co., Ltd. is a technology-leading manufacturer of research, development, production and sales.It has advanced equipment, mature technology and a group of experienced technical talents.It is also a domestic strong supplier. As an excellent company in the industry, Kodak now has extremely strong design, development, and production capabilities. It has a variety of product models, high precision, and reliable quality. It makes customers happy to buy and rest assured! "Pursue product innovation, customer satisfaction as the goal", has won the unanimous recognition of the industry and customers. Select Keda Instrument Co., Ltd.! Hotline: 0392-2625100